Denali D4 LED Spot Lights (X2) & DialDim Smart Controller Kit
We have put together this bundle which is a pair of D4 Light pods with hinged mounts and the revolutionary Denali DialDim controller which includes all the necessary wiring harness and conectors.
See the description below to see the fantasic control and features possible with this set up.
Details of both products listed below.
DialDim Controller : One Switch, Two Circuits, Infinite Control
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
DialDim™ Harness Overview
The dedicated light outputs are labeled and color coded so adding one or two sets of lights to you vehicle couldn't be any easier. Connect your main lights to the blue leads and your 2nd set of lights (typically fog or visibility lights) to the green leads.
Then simply connect the ring terminals to the vehicle battery and the white 12v input wire to a switched power source. To enable the high beam sync, turn signal flashing features, or horn flashing features simply connect the input wires to the corresponding circuit on the vehicle.
In addition the controller harness and switch, the kit includes (4x) five foot plug-&-play light extensions and a handlebar switch mount. Simply add the light pods and your ready to ride!
On/Off & Dim
Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low Sync
Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature.
Stealth Mode
A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
Cancel with Turn Signal
When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Flash as Turn Signal
When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Strobe with Horn
When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits
Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
Voltage Display Indicator
Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
Low Voltage Cutoff
If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included spot lens throws a massive beam of light and carries an official E-Mark certification.
D4 Pod Features
- High-Intensity Series Cree LEDs outputting 4380 lumens per pod
- DrySeal™ Submersible Waterproof light can withstand the most extreme environments
- LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
- Low profile mounting bracket with stainless steel hardware included
- Additional E-Mark Approved flood lens included
- Amber lenses available (sold separately) DNL.D4.10100
D4 Pod Specs
- LED’s: (4x) 10 Watt Cree XPL HI
- Power Draw: 3.3 Amps
- Raw Lumens: 4380
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 3.9” Square x 2.6” Deep
- Pod Weight: 1.55 lbs
- IP67 Waterproof & Submersible
- E Mark Approved Spot Lens
Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included spot lens throws a massive beam of light and carries an official E-Mark certification.
D4 Pod Features
- High-Intensity Series Cree LEDs outputting 4380 lumens per pod
- DrySeal™ Submersible Waterproof light can withstand the most extreme environments
- LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
- Low profile mounting bracket with stainless steel hardware included
- Additional E-Mark Approved flood lens included
- Amber lenses available (sold separately) DNL.D4.10100
D4 Pod Specs
- LED’s: (4x) 10 Watt Cree XPL HI
- Power Draw: 3.3 Amps
- Raw Lumens: 4380
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 3.9” Square x 2.6” Deep
- Pod Weight: 1.55 lbs
- IP67 Waterproof & Submersible
- E Mark Approved Spot Lens
Universal Crash Bar Mounts available here
Bike Specific Light Mounts available here
Please feel free to call or email us with any questions about this set up.
Availability: If the ADD TO CART button is visible this item is in stock and can be despatched the same day if ordered before: 2pm (Mon-Fri) Next working day delivery available for mainland UK. Please allow an extra day for Scottish Highlands & Islands
You may return items within 60 days of delivery for a full refund. We'll also pay the return shipping costs for orders over £25 or if the return is a result of our error (you received an incorrect or defective item, etc.). We would expect the return to be in the original undamaged packaging and in resalable condition.
You should expect to receive your refund within two weeks of giving your package to the return shipper, however, in many cases you will receive a refund much quicker. This time period includes the transit time for us to receive your return from the shipper, the time it takes us to process your return once we receive it, and the time it takes your bank to process our refund request.
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
